Topic   Jeroen Breukels
Send AWE notes and topic replies to editor@upperwindpower.com
http://members.ziggo.nl/jeroenbreukels/publications.html
1. Breukels, J., Ockels, W.J., "Simulation of a Flexible Arc-shaped Surf Kite", Submitted to: AIAA Journal of Aircraft. (2010)

2. Breukels, J., Ockels, W.J., "A Multi-body System Approach to the Simulation of Flexible Membrane Airfoils", Submitted to: ADIAA Missili i Spazio (2010)

3. Breukels, J., Ockels, W.J., "Simulation of a Three Dimensional Flexible Sail Wing with an Inflated Tubular Spar", Submitted to: ADIAA Missili i Spazio (2010)

4. Terink, E.J., Breukels, J., Schmehl, R., Ockels, W.J., "Flight Dynamics and Stability of Tethered Inflatable Kiteplane", Submitted to: AIAA Journal of Aircraft (2010)

5. Breukels, J., Ockels, W.J., "A Multi-body System Approach to Simulation of Inflated Tubular Beams", Submitted to: Journal of multi-body system dynamics. (2009)

6. Verheul, R.F., Breukels, J., Ockels, W.J., "Material selection and joining methods for the purpose of a high-altitude inflatable kite", 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, USA.

7. Breukels, J., Ockels, W.J., "Analysis of complex inflatable structures using a multi-body dynamics approach", 49th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Schaumburg, IL, USA.

8. Breukels, J., Ockels, W.J., "A multi-body dynamics approach to a cable simulation for kites" AsiaMS2007, Oct 8 - 10, Beijing, China.

9.* Breukels, J., Ockels, W.J., "Design of a large inflatable kiteplane", 48th AIAA Structures, structural dynamics and materials conference, Waikiki, Hawaii, USA
10. Breukels, j., Ockels, W.J., "Numerical and experimental results of the airfolw in the Delft University KiteLab", 37th AIAA Fluid Dynamics conference, Miami, FL, USA.

11. Breukels, j., Ockels, W.J., "Past, present and future of kites and energy generation", PES2007, Clearwater, FL, USA.

12. Breukels, J., Ockels, W.J., "Tethered kiteplane design for the Laddermill project", World Wind Energy Conference 2005, Melbourne, Australia.

 

Internal reports

1. Breukels, J., "Kite Launch using an Aerostat", ASSET Internal report, 2007, Delft, The Netherlands

2. Breukels, J., "KiteLab, basic operation and procedures", ASSET Internal Report, 2006, Delft, The Netherlands

3. Breukels, J., "KitEye, WP3 to WP8", European Space Agency progress report, 2005.

 

Articles

1. "Vliegers gaan daar waar het hard waait", De Technologiekrant, 2010.
2. "The power of kite technology", Osiris magazine, 2009.
3. "Het speelgoed ontstegen", NRC Handelsblad, 2006.
4. "High Altitude Wind Power", Scientific American, 2006.
5. "Generating Wind Energy using Kites", Windtech International, 2006.
6. "Vliegeren op grote hoogte", Delta, 2007.
7. "Wie maakt de beste energievliegers?", Mens & Wetenschap, 2005.
8. "Vliegerkennis stokt bij boerenverstand", Quest, 2005.
9. "ASSET and the world of kites", Leonardo Times, 2005.
10. "De vliegers van Wubbo Ockels tegen CO2", Algemeen Dagblad, 2007.
11. "Een alliantie met de natuur", Leonardo Times, 2004.
12. "Reus van Morgen", Lumen Magazine, 2007.
13. "Wie vangt de meeste wind?", Telegraaf, 2005.
Reference for    Breukels, J., Ockels, W.J., "Design of a large inflatable kiteplane", 48th AIAA Structures, structural dynamics and materials conference, Waikiki, Hawaii, USA

1. Breukels, J. “Design of a high altitude inflatable kite”, Master thesis report, Delft University of Technology, 2003.

2. Jong, Th. De, “A theory of filament wound pressure vessels” Report LR-379, Delft University of Technology, 1983.

 3. Veldman, B. “PhD thesis”

4. Breukels, J., Ockels, W.J., “Tethered kiteplane design for the laddermill project” WWEC Melbourne November 2005.

5. Breukels, J., 2006, “KiteLab” ASSET Internal report. Faculty of Aerospace Engineering, Delft University of Technology

6. Breukels, J., 2005, “KitEye WP3 – WP8” ASSET Internal report. Faculty of Aerospace Engineering, Delft University of Technology

7. Cadogan, D, Smith, T., Lee, R., Scarborough, S., Graziosi, D., “Inflatable and Rigidizable Wing Components for Unmanned Aerial Vehicles,” AIAA No. AIAA-2003-6630, 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Norfolk, VA, April 2003.

8. Simpson, A., Santhanakrishnan, A., Jacob, J., Lumpp, J., Cadogan, D., Mackusick, M., Scarborough, S. ‘Flying on air: UAV flight testing with inflatable wing technology’. AIAA-2004-6570 AIAA 3rd”Unmanned Unlimited” Technical Conference, Workshop and Exhibit, Chicago, Illinois, September 2004.

9. Simpson, A., Jacob, J., Smith, S., “Inflatable and Warpable wings for Meso-scale UAVs,” AIAA 2005-7161, Infotech@Aerospace, Arlington, Virginia, September 26-29, 2005

10. Cadogan, D.P., Scarborough, S.E., Gleeson, D., Dixit, A.,“Recent Development and Testing of Inflatable Wings,” AIAA-2006-2139, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and 14th AIAA/ASME/AHS Adaptive Structures Conference, Newport, Rhode Island, May 1-4, 2006

11. Veldman, S.L., Vermeeren, C.A.J.R., Bersee, H.E.N., Bergsma, O.K., Conceptual design of a high altitude kite, Faculty of Aerospace Engineering, Delft University of Technology, AIAA-2002-1735.


12. Den Boer, R.G. “Numerical and Experimental investigation of the aerodynamics of double membrane sail wing airfoil sections” Delft University of Technology. Faculty of Aerospace Engineering, Delft, the Netherlands.